The information on this website is intended for guidance only. It has been reviewed and is believed to be accurate. However, since we gathered technical data from various technical sources, the actual mechanical and physical properties will vary from one lot of material to the next. Therefore, neither Machining Technologies nor its affiliates assume any responsibility for inaccuracies, typographical errors, omissions, or outdated information that maybe contained herein. You assume the sole risk of making use or relying on the information, materials, products, and services available on this website. In no event will Machining Technologies or its affiliates be liable for direct, indirect, special, incidental, or consequential damages resulting from any defects or omissions on this website, even if advised of the possibility of such damages. You should determine the suitability of a material or product by conducting practical tests under realistic conditions.

Machining Technologies reserves the right to make improvements or changes to this website, materials, products and services described at any time, without notice or obligation. Moreover, Machining Technologies reserves the right to refuse or cancel quotes or orders at any time, including but not limit to quotes or orders that contain incorrect prices or product descriptions, quotes or orders in which Machining Technologies believes the customer has violated applicable law, and quotes or orders that Machining Technologies believes are harmful to Machining Technologies or its affiliates.

[ top ]

Your privacy is very important to Machining Technologies. We are committed to safeguarding the information you entrust to us. Any data you may be asked to provide in connection with your use of this website shall be used in accordance with applicable national and international data protection legislation.

Machining Technologies may also collect information about how you use our website, for example, by tracking the number of unique views received by the pages of this website. We may use "cookies" to track how you use our website. A cookie is a piece of software that a Web server can store on your PC and use to identify you should you visit this website again. While not all of the information that we collect from you is personally identifiable, it may be associated with personally identifiable information that you provide us through our website.

By providing this data you accept that Machining Technologies may use it in order to provide you with information as to its products, services and activities.

Our website contains links to other websites. Machining Technologies is not responsible for the privacy practices and content of these third-party websites. We urge you to follow safe Internet practices: Do not supply personal information to these websites unless you have verified their security and privacy policies.

Machining Technologies DOES NOT DISCLOSE, SELL, TRADE, OR RENT YOUR INFORMATION TO THIRD PARTIES.

[ top ]

The materials available on this website are subject to copyright, industrial property, registered mark or trademark or other proprietary rights. Machining Technologies grants you a license to view these materials during your visit only. You shall neither modify nor alter the materials or the website during your visit to this website. You may not download, modify, copy, distribute, broadcast, transmit, reproduce, publish, license, transfer, sell, mirror, frame, deep link, or otherwise use any information or materials obtained from or through this website without a prior written permission from the materials' owner. The materials can be modified, replaced, or removed by Machining Technologies at any time with or without notice, at our discretion.

As a condition of your use of this website, you warrant to Machining Technologies that you will not use this website for any purpose that is unlawful, unauthorized, or inconsistent with these Terms and Conditions, and you agree that this license to use this website will terminate immediately upon your violation of this warranty.

Any commercial signs displayed on this website are Machining Technologies' registered marks or trademarks and protected by national and international law.

These materials are provided for information purposes only and free of charge. The materials are furnished on an "AS IS" and "WHERE IS" basis, without representation and warranties of any kind, including any warranties as to the completeness or accuracy of the information provided, merchantability or fitness for purpose, or absence of viruses or harmful materials. You agree not to rely on any information provided on this website for whatever purpose.

[ top ]

While visiting this website you may encounter text or graphic links which lead to third parties' websites. You acknowledge that these linked sites are developed and maintained by third parties, which are unrelated to Machining Technologies and its affiliates. The presence of a text or graphic link on this website cannot be considered as an endorsement by Machining Technologies of the content, nature of the website, products, and services available on such linked sites which Machining Technologies does not examine nor regularly review and for which Machining Technologies is not responsible. Therefore, Machining Technologies makes no warranties whatsoever as to those linked sites or their content.

Machining Technologies expressly disclaims responsibility for the content of any linked sites, the accuracy of any information contained in any linked site, and the quality of the products and services offered at any linked sites. Any decision to view the contents of any linked sites is solely yours and is made at your own risk.

[ top ]

Machining Technologies reserves the right to, in its absolute discretion, totally or partially restrict your access to this website and its content at any time without notice. Accessing of this website from locations where it is against the law to do so is forbidden.

[ top ]

Machining Technologies welcomes your comments about your experiences with us and your suggestions about how to improve this website. Any comments, ideas, suggestions, information, or any other contents you contribute to Machining Technologies or this website regardless of its form or subject (including the name you submit with any contents) shall not be protected by any confidentiality or trade secret obligations, or any protections granted by statute or precedent and will be deemed to include a fully paid-up license to the idea and its derivatives, royalty-free, perpetual, irrevocable, worldwide, nonexclusive right and license for Machining Technologies to adopt, publish, reproduce, disseminate, transmit, distribute, copy, use, create derivative works from, display worldwide, or act on such content--without additional approval or consideration--in any forms, medias, or technologies now known or later developed for the full term of any rights that may exist in such content, and you waive any claims to the contrary. You represent and warrant that you own, have all rights necessary to grant such license to Machining Technologies, or otherwise control all of the rights to the content that you contribute to this website and that use of your content by Machining Technologies will not infringe upon or violate the rights of any third parties.

You hereby agree that you shall have no claims whatsoever against Machining Technologies whether based on intellectual property infringement, breach of confidentiality, unfair competition or trade secret protection for the submission of an idea to Machining Technologies.

[ top ]

You agree to use this website for no unlawful or otherwise objectionable purpose. You agree to indemnify, defend, and hold harmless Machining Technologies, its affiliates, and all of their employees, agents, officers, directors, proprietors, partners, representatives, shareholders, servants, attorneys, accountants, predecessors, successors, and assigns from and against any and all claims, proceedings, damages, injuries, liabilities, losses, costs, and expenses (including but not limit to reasonable attorneys' fees and litigation expenses) relating to or arising from, of whatever nature, your use of this website or any breach by you of these Terms and Conditions.

[ top ]

By visiting this website, you agree that the laws of the United States of America, without regard or reference to its conflict of laws principles, shall govern these Terms and Conditions. Any disputes of any sort that might arise from or in connection with the use of this website between you and Machining Technologies or its affiliates shall be settled by the courts of Ohio.

Machining Technologies makes no representation that materials on this website are appropriate or available for use in other locations, and access to them from territories where any of the contents of this website are illegal is prohibited. Furthermore, Machining Technologies makes no representation that the products and services available for sale or use on this website or directly from us are appropriate or available for use in other locations, and use or purchase of such products or services from territories where such purchase or use is illegal is prohibited. If you choose to access or make purchases from this website or directly from us from other locations, you do so on your own volition and are responsible for compliance with any applicable local laws.

In the event that any provision contained in these Terms and Conditions is held by a court of competent jurisdiction to be contrary to any law, the remaining provisions of these Terms and Conditions will remain in full force and effect. No joint venture, partnership, employment, or agency relationship exists between you and Machining Technologies as a result of these Terms and Conditions or your use of this website. The waiver by Machining Technologies of one breach or default under these Terms and Conditions shall not constitute the waiver of any subsequent or other breach or default.

[ top ]

IN NO EVENT SHALL Machining Technologies or its affiliates BE LIABLE FOR ANY DAMAGES WHATSOEVER, HOWSOEVER ARISING FROM YOUR USE OF THIS WEBSITE, WHETHER Machining Technologies IS ADVISED OF THEIR POSSIBILITY OR NOT. Machining Technologies SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXTRAORDINARY OR OTHER DAMAGES ARISING FROM YOUR USE OF THIS WEBSITE, INCLUDING LOSS OF REVENUE OR PROFITS. THE FOREGOING PROVISIONS APPLY TO ANY CLAIMS, WHETHER BASED ON CONTRACT, NEGLIGENCE OR TORT.

[ top ]

These Terms and Conditions, together with other rules and policies posted on this website, which are hereby incorporated as if set forth fully in these Terms and Conditions, constitute the entire agreement between you and Machining Technologies with respect to your use of and material available through this website. Any prior or contemporaneous communications, discussions, agreements, warranties or representation, whether oral, or in written or electronic form, are superseded by these Terms and Conditions.

Any rights not expressly granted in these Terms and Conditions are reserved.

[ top ]

Regarding the use of trademarked names in metatags and/or hidden text, Machining Technologies has a no-tolerance policy. The use of trademarked names in metatag keywords is trademark infringement, and the use of trademarked terms in page text, metatags, and/or hidden text for purposes of gaining higher rankings from search engines is unfair competition.

Linking to any machiningtech.com web page is prohibited absent express written permission from Machining Technologies. Framing the machiningtech.com website with links, advertisements and/or other information not originating from the machiningtech.com website is expressly prohibited.

[ top ]